Telescoping Flagpole (120.111) Help
Why Choose Telescoping Flagpole?
- Raises and lowers in sections so adjustments are a breeze
- No ropes, pulleys, or halyards so flag flies quietly
- Flag attaches to 360° rotation collar so it won't tangle or knot
- To remove, just pull from provided ground sleeve
- Easily change flagpole locations with additional ground sleeve
- Manufactured with 16-gauge anodized aluminum and never needs painting
Measurements & Sizing
Pole Diameters
Note: measured at bottom of pole:
- 2.5" (20' & 25' poles)
- 2.25" (16' pole)
Recommended Sizes
| Pole Height | Flag Size |
|---|---|
| 16' | 3' x 5' |
| 20' | 3' x 5' |
| 25' | 4' x 6' |
| 30' | 5' x 8' |
| 35' | 6' x 10' |
| 40' | 6' x 10' |
Half-Staffing
To half-staff using the telescoping flag pole, move the flag from the top position to the bottom, second-flag position. In addition, to enhance the effect, you may also lower your pole one position to reduce its height.
Installation & Materials Required
- Telescoping flagpole PVC sleeve (included)
- Approximately three 60-lb bags of concrete mix
- Measuring tape or yard stick
- Contractor’s level
- Small rock or coarse gravel container for mixing concrete
Dig a hole 28” deep by 12” round and place 6” of small gravel for drainage on the bottom of the hole. Insert bolt in sleeve. Place sleeve in hole. Surround sleeve with cement, place level on top of the sleeve to see that it is level. Set and cure overnight.
*Detailed installation instructions are included with the flagpole.
Last Updated: April 4, 2025
(888) 453-4466 | Contact Us | Privacy Policy
The American Legion
